How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to add another key. This requires an electronic handheld computer, referred to as Tech-2, to be used by the dealer. A new key and transponder have to be purchased and then programmed into the car.
It is recommended to rotate your keys in order that one doesn't get damaged faster than the other. This will also ensure that your keys remain in good condition.
Replacement Case
As opposed to the traditional Saab keys of the past keys, the modern key fobs are equipped with electronics which makes it difficult to copy. This has made stealing car keys considerably more difficult than it was years ago. It has also made it more expensive to replace lost keys.
Every owner of a Saab 9-3 should have at minimum two working keys. If one is lost it costs a fortune to get another one for the car since it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100 and $200 to do this.
There are ways to cut down on these high costs. Some parts providers will find the code from an extra key (usually the same one that opens the doors and turns off the ignition) and cut a new key blade from metal for only a fraction of the dealer's cost. The key must be exactly the identical to the original one for it to function in your vehicle.
Follow these steps to replace the case. You will need a flathead screwdriver and some patience. Utilizing the screwdriver, slowly pull the plastic apart and separate the emergency keys from the case. Once the case is open take the electronics out and place them into your new case. Make sure you insert the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a cheap component that can be quickly and easily replaced. This YouTube tutorial for DIY Cyclone Cyd, a user on YouTube, explains how to replace the battery of the remote key fob in only four steps. This tutorial can be used with any modern Saab key fob. However, the procedure could differ slightly.
This button is usually located near the Saab logo on the back of the fob. It's usually just below the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver in the small hole on this button. This should be sufficient to let the fob case open so that you can change the battery.
After the new battery CR1632 is installed then you can reassemble your remote key fob. You can then program it to your car. The procedure should take no more than an hour, if not less. This is a straightforward procedure that doesn't require special tools.
If you lose a key, the procedure will be slightly more complicated however, it can be accomplished. The dealer will need to determine the VIN of the car and then request a replacement key blade and TWICE module, both with the correct unique code. The dealer will then need to program the key using MDI an innovative software tool.
Key Replacement Fob
The key fob is the piece that locks and unlocks your car. It has an internal battery. replacement saab car keys have a lifespan that is a long time, and they eventually expire. This is a common problem that happens with all cars and the good news is that you can change the batteries in a majority of key fobs and not have to replace the whole case. You can buy fobs replacements on Amazon that have all the electronics already installed, so you can simply open the case and replace the batteries in the original case. You'll need to remove the emergency key before you can replace the batteries. To accomplish this, simply insert the screwdriver of a small flat head into the slot in the middle of the. Use the screwdriver to move around the case until it is split open, making it much easier to take it out.
If you're planning to replace your keys, make sure you have a spare on hand. This will save you a lot of money. If you have an additional key, you can ask the dealer to cut the key and program it for your vehicle. This is less expensive than purchasing a brand new key fob.
It is possible to add a second key to your vehicle If you don't already have one, but it requires an extensive amount of research and work. It will cost you a few hundred dollars to purchase an additional car key. The computer of the car also needs to be programmed. Professionals can accomplish this, but it's an expensive option.
Replacement Ignition
The current SAAB 9-3 has a more sophisticated alarm system built around a key code. This means that in the event that you lose your only working key, acquiring another key can be extremely expensive because the car needs to have a specific computer module installed, and it must also be specifically programmed to accept an additional key. Dealers can even charge hundreds of dollars to program the new key if they are unable to do it.
Dealers will charge you a high price to replace your car computer (also called the CIM or SAAB twice) If you lose the only working key. We can reprogram the EEPROM of your car's computer so that it is ready for an additional key. This will save you more than 50% of the cost you pay the dealer.
If you've been an owner of an 03-11 SAAB 9-3, then you likely realize that the ignition key isn't very durable. They can be extremely sticky and the buttons are known to fall off of them from time to time which is why you should think about buying a new one if the one you have isn't performing as it should. The good news is that replacing the ignition key isn't as difficult as it sounds and is fairly easy to do with the appropriate tools.